FEMTO高頻電荷放大器HQA-15M-10T/進口電荷放大器廠家

特點：

High Gain of 10 V/pC

Wide Operating Range from 250 Hz to 15 MHz

Low Input Noise of 40 x 10-21 C/√Hz and 700 pV/√Hz

Optimized for Sinusoidal Signals from AC Coupled Charge Sources

應用：

Pyro- and Piezoelectric Detectors

Tuning Fork Quartz Crystals

Length Extension Resonators

Atomic Force Microscopy

Optical Measurements

Charged Particle Beam Monitoring

技術參數(shù)：

測試條件 Vs = ±15 V, Ta = 25 °C

電荷增益 10 V/ PC （@≥1MΩ負載）

等效電流增益 1.6 V /μA （@1MHz的正弦輸入信號）

增益精度 ±3％

帶寬下限截止頻率(?3 dB) 250 Hz

帶寬上限截止頻率(?3 dB) 15 MHz (with max. 100 pF source capacitance)

輸入阻抗 1 GΩ || 10 nF

有效的AC輸入阻抗 20 Ω (@ 1MHz)

輸入電荷噪聲 40 x 10-21 C/√Hz (@ 1 MHz, with open input)

90 x 10-21 C/√Hz (@ 1 MHz, with 100 pF source capacitance)

General:

The amplifier is AC coupled for direct use with a charge sensor producing sinusoidal signals with no DC background. A source capacitance of less than 1 nF is recommended for proper operation. If the effective source capacitance (sensor plus cable capacitance) is small relative to the effective input impedance of the amplifier (10 nF) the amplifier acts as a virtual ground and most of the charge flows into the amplifier input. At 1 MHz the amplifier input capacitance of 10nF corresponds to a complex input impedance of 20 Ω. An input resistor of 1 GΩ is incorporated to prevent buildup of static charge. The amplifier is not suited for sources producing an average DC background current as this would saturate the device.

FEMTO高頻電荷放大器HQA-15M-10T/進口電荷放大器廠家

FEMTO高頻電荷放大器HQA-15M-10T/進口電荷放大器廠家

FEMTO高頻電荷放大器HQA-15M-10T/進口電荷放大器廠家

FEMTO高頻電荷放大器HQA-15M-10T/進口電荷放大器廠家